Back to Everyday Climate Choices ACT Government

Property Owner Report

The size of the area you are heating, the number of hours heaters are on, and the temperature setting all have a big impact on your bills.
In summer a comfortable and cost-effective range to set the thermostat is 25-27°C, and in winter it is 18-20°C

Completing some or all of the recommendations in this report will make your property more energy efficient and comfortable, and should improve its value.

When you’ve read your recommendations, check out the links and resources at the end of this report and at www.climatechoices.act.gov.au.

If you live in the ACT, you can get free expert advice on saving energy in your home including additional support implementing these recommendations or checking your bills, by calling the ACT Sustainable Home Advice line on 1300 141 777 or emailing SustainableHomeAdviceProgram@act.gov.au.

test test

If you found your home energy assessment and report useful please let your friends, family and networks know.


Windows and draughts

Your recommendations

  • Also, installing pelmets above the blockout curtains would increase the Energy Efficiency Rating of the property, improving the value of the property.

You can find more detailed information about draught-proofing, window insulation and window coverings in the links at the end of this report.


Heating

Your heating recommendations

  • Regularly check and clean the dust from your air conditioning vents and filters to ensure your system is running as efficiently and safely as possible. This can reduce running costs by 5-15%.
  • Reverse cycle air conditioning is the most energy-efficient form of heating. Installing air conditioning in all rooms that need to be heated is likely to reduce total heating costs.

There is more information about heating your home in the links at the end of the report.


Fans are an extremely cost-effective way to keep cool in summer - they cost only 1 to 2 cents per hour to run.

Cooling

Your cooling recommendations

  • Keep your home cooler in summer by opening your windows, doors and curtains when it cools down at night, then closing them in the morning as soon as it starts to get warm outside.
  • Air conditioning units should be serviced annually. This will extend the life of the unit, saving you money in the long term
  • If you are thinking about buying a new cooling appliance, check the energy star rating labels (see https://www.energyrating.gov.au/). More stars mean more energy-efficient. Choosing a more energy-efficient cooling appliance will reduce energy consumption and help lower energy bills.

A plug-in power meter

Appliances

Your appliances recommendations

  • You can find out how much each of your appliances is costing you by getting a plug-in power meter (see photo). It will show how much power the appliance has used since it was plugged into the meter and will calculate the cost. You can buy power meters at hardware stores or online.
  • When the time comes to buy a new appliance, check the energy star rating labels (see https://www.energyrating.gov.au/). More stars mean greater energy efficiency. Choosing a more energy-efficient appliance will reduce energy consumption and help lower energy bills.
  • A new, efficient dishwasher could save considerably on running costs. Look for a unit with an eco function and the best energy and star rating you can afford
  • A new, efficient dryer could save considerably on running costs. It is now possible to buy heat pump dryers with 10 star energy rating.

Pipe insulation (often called lagging) is low cost and readily available from most hardware outlets. Insulate the first 2m of exposed pipes from your hot water unit, especially those carrying hot water.
Hot water heat pumps are significantly more energy-efficient than conventional water heaters.

Hot Water

Your recommendations

  • Insulate all pipes going into and out of your hot water unit with foam tubing, known as lagging, to prevent heat loss, especially the two metres closest to your water heater.
  • Ask an electrician to check that the hot water storage tank thermostat is set at 60 degrees. Running costs will be higher if the temperature is set any higher. (To prevent the growth of Legionella bacteria in the tank, the thermostat should never be set lower than 60 degrees).

Insulation

Your insulation recommendations

  • Not applicable (e.g. if your home has another home above it).

Links & Resources


For further information about your recommendations and how to implement them please contact:

For further information about ACT energy efficiency programs and technical advice, call the ACT Sustainable Home Advice line on 1300 141 777, email sustainablehomeadviceprogram@act.gov.au, or visit www.climatechoices.act.gov.au.

Any Questions or Feedback? Please use this form.